General Specification | Flexo Springs

General Specification

 

  Compression Springs Extension Springs
Working
Length
Its is not advisable to use more than
80% of the maximum possible
deflection.
We recommend a safe extended
length for our springs
End Coils Up to 0.5mm wire - closed only.
Over 0.5mm wire - closed & ground
Full loops are similar to outside
diameter. Loop end positions may
vary.
Tolerances British Standard - BS 1726:
Part1:Grade 2
British Standard - BS 1726:
Part2:Grade 2
Materials Carbon Steel Wire / Music Wire - British Standard BS5216, Grade ND3.
Winding Springs are normally right wound, however this may vary.
Finish Springs are stress relieved at appropriate temperatures, and stock springs
are supplied in a plain finish, lightly oiled.
Web Analytics